Show

Forgot your password?

Error message here!

Error message here!

Error message here!

Error message here!

Show Error message here!

Show Error message here!

Lost your password? Please enter your email address. You will receive a link to create a new password.

Error message here!

Back to log-in

Close

For Sale

The following items are listed by for sale by users of the site and dealers. They are in no way endorsed or guaranteed by www.antiquearmsresearch.com

Add a Classified Item
to

Clicking on the sword will take you through to the relevant classified item or dealer site.
Don't miss out! - Do you want to be kept informed weekly of new aditions? Just join our weekly update list.

You can also receive regular email notifcations when items match your keywords. To recieve them just register or logon at the top right of this page.

Page 136 of 157
  • Nation : French
  • Local Price : £145.00
French M1886/93/16/35 Lebel Bayonet. Description Cruciform shortened spike blade, steel hilt with muzzle ring, brass grip, tubular steel scabbard. Brown leather frog, outer side painted black. Blade 33.5cm (13¼ inches) in length, the bayonet 45.5cm (~18 inches) overall. The hilt is stamped with a serial number which is beneath paint, making it only partly legible. The blade has an inspection mark &#acute;T&#acute; to the forte. The 1886/93/16 bayonet pattern fitted to the M1886 Lebel and M1907 Berthier rifles used by the French Army during WW1, and was the third version of the M1886 (which was revised in 1893 and 1916). This version had a simplified flat locking button and was manufactured without the quillon found on earlier types. The brass handle was another expediency measure to increase production “ German silver (cupro-nickel-zinc alloy) was the original material. In 1935 many of the various types of Lebel bayonets in the French arsenals had their blades shortened to 13¼ inches by removing the slender tip and repointing. The shorter blades were considered less prone to breakage, and perhaps with the decline of the bayonet in warfare additional reach was less important than ease of carry. The scabbards were also modified to match “ this one has been cut down to size by removing the lower section, with the chape end (with drainage hole) then reattached by brazing. The blade has some spots of patination, particularly towards the reshaped tip. The scabbard has a few small dents and some losses to the black gloss paint, revealing patinated steel. The hilt has the same black paint, in the same condition. The brass grip has tiny dents. The leather frog is flexible, with all if its stitching intact. There is one small tear to the edge of the leather on the rear side belt loop, not enough to threaten its integrity. Some surface cracking to the unpainted rear side, and rubbing of the paint in high-wear areas on the front side, revealing the brown leather.
  • Nation : British
  • Local Price : £145.00
British WW1 1913 Pattern Bayonet, Dated 9/1916 by Remington. Description Unfullered spear pointed blade, wood scale grips with two brass rivets. Steel pommel and hilt with short quillon and muzzle ring. Brown leather scabbard with steel throat and chape. Blade 11.97 inches in length (304mm), the bayonet 16.69 inches overall (424mm). This bayonet is a little unusual in that it is completely unmarked with no reference to its maker or any government service. Its muzzle ring has been bushed to around 14.7mm in diameter (the standard for the 1888 Pattern being 16.5mm). Both the bayonet and its scabbard seem to be subtly non-standard, a good but not 100% correct rendition of the Pattern. Putting these factors together this might be the &#acute;India Pattern&#acute; version of the 1888 bayonet - approved in 1904, this version&#acute;s modification &#acute;consisted merely of bushing the muzzle ring to suit the smaller diameter of the Lee-Enfield cavalry carbine barrel, which would make the MRD of the bayonet about 14.7mm&#acute; (see British & Commonwealth Bayonets by Skennerton & Richardson p342, or British Commonwealth Bayonets and Fighting Knives by Skennerton & Labudda p370). If the bayonet was actually produced in India that might explain its non-standard construction. As shown in Skennerton some rough copies of the 1888 Pattern were made for State Forces in India which were distinctly cruder than the official version “ this example is better-made and closer in form to the Pattern than those. Alternatively this might be one of the &#acute;trade&#acute; or &#acute;commercial&#acute; 1888 bayonets, which were not made as part of any government contract and were instead sold to Volunteer units or private buyers by firms including Wilkinson and Greener. These generally bear no government markings, although not even bearing a maker&#acute;s mark is unusual. Some trade bayonets were even assembled from surplus parts, bought up after the end of the official production by Greener. Spare-parts bayonets can show unusual features including having clearance holes on both the pommel and the grips (Mk I grips having been paired with a Mk II or III pommel) or, like this example, no clearance holes at all. The blade is bright with only some tiny spots of very light patination. It is unsharpened with no edge damage. The hilt, exposed tang and pommel have a dark even patina. The wood grips have only a couple of tiny shallow dents and little handling wear, their finish generally lustrous with visible grain. The throat and chape pieces of the scabbard are deeply blued with only small spots of wear to the finish. The chape piece of the scabbard is essentially a tube, open at the bottom “ this may have been deliberate to allow drainage or there may have been a small end plate that has been lost. The leather of the scabbard has some light creasing from bending and a few small spots of rubbing, but is generally good and flexible, with its stitching all intact.
  • Nation : Indian
  • Local Price : £145.00
Indian No.1 Mk II Bayonet. RFI 1943. #2211015. This Indian No.1 Mk II pattern bayonet was made at the Rifle Factory in Ishapore in 1943. The only difference between the Mk II and Mk II* is the upper false edge on the Mk II*. The 306mm single-edged blade has a rounded spine. The un-fullered blade terminates in an asymmetrical point. The blade is in good condition with its original factory edge.The ricasso is stamped with the Mk II pattern designation and R. F. I. maker’s mark below the manufacture date, 8 ‘43. The obverse ricasso bears three inspection stamps.The cross-piece, muzzle ring and bird-beak pommel are in good condition and retain their original blued finish. The locking catch is in crisp working order. The wooden grip scales are in good condition. The scales are held firmly in place with two blued screws.The bayonet is complete with its leather scabbard with steel locket and chape. The scabbard is in good condition. The leather is strong and the stitching is intact. The steel locket and chape retain their original finish. The bayonet sheathes and draws smoothly and is held firmly within the scabbard.This is a good example of an Indian WW2 Mk II bayonet. Was: £145.00Now:
  • Nation : Indian
  • Local Price : £145.00
Indian No.1 Mk II Bayonet. RFI 1943. WW2. #2211014. This Indian No.1 Mk II pattern bayonet was made at the Rifle Factory in Ishapore in 1943. The Mk II was a newly made bayonet as opposed to being a conversion. The only difference between the Mk II and Mk II* is the upper false edge on the MkII*.The 304mm single-edged blade has a rounded spine. The un-fullered blade terminates in an asymmetrical point. The blade is in good condition and retains its factory edge.The ricasso was initially stamped with the incorrect designation (Mk I*) but an additional 1 was later stamped over the *. The ricasso is also stamped with the crowned cypher of George VI, Emperor of India and the manufacture date, 1 ’43 over the R.F.I maker’s mark.The obverse ricasso bears three inspection stamps.The cross-piece, muzzle ring and bird-beak pommel are in good condition with mild wear to their original blued finish. The locking catch is in crisp working order. The wooden grip scales are in good condition with use-related wear. The scales are held firmly in place with two blued screws.The bayonet is complete with its leather scabbard with steel locket and chape. The scabbard is in very good condition. The leather is strong and the stitching is intact. The steel locket and chape retain their original finish. The bayonet sheathes and draws smoothly and is held firmly within the scabbard.This is a good example of an Indian WW2 Mk II bayonet. Was: £145.00Now:
  • Nation : Indian
  • Local Price : £145.00
Indian No1. MkII* Bayonet. WW2. North Western Railways. #2202015. This Indian No.1 Mk II* pattern bayonet was made North Western Railways in 1943. The only difference between the Mk II and Mk II* is the upper false edge on the MkII*. The addition of a false edge was in order to improve the points’ penetration.The 304mm single-edged blade has a rounded spine and upper false edge. The un-fullered blade terminates in an asymmetrical spear point. The blade is in excellent condition with its original blackened finish and factory edge.The ricasso is stamped with the pattern designation, II*, maker’s mark N.W.R over the manufacture date, ‘43.The obverse ricasso bears the number 189.The cross-piece, muzzle ring and bird-beak pommel are in excellent condition and retain their original blued finish. The locking catch is in crisp working order. The wooden grip scales are in excellent condition. The scales are held firmly in place with two blued screws.The bayonet is complete with its leather scabbard with steel locket and chape. The scabbard is in very good condition. The leather is strong and the stitching is intact. The steel locket and chape retain their original finish. The bayonet sheathes and draws smoothly and is held firmly within the scabbard.This is an excellent example of an Indian WW2 Mk II* bayonet. Was: £145.00Now:
  • Nation : Turkish
  • Local Price : 200.00 USD
19th Century Turkish Or Hungarian Sword (shamshire)!. Here we have a wonderful Turk or Hungarian drastically curved saber! Blade is 31" long. Hilt has wonderful twisted iron guard and original wood "pistol" grip (some age cracks). A very impressive and very sturdy weapon! Selling at a bargain price! Price is firm. Thanks for looking! Be sure to check out our other listings for more great swords, arms and armor! Our direct email address is: [email protected]
  • Nation : -
  • Local Price : 1,800 kr
Norwegian saber bayonet w/1860.
  • Nation : -
  • Local Price : 1,800 kr
Dua lalang svärd Indonesien.
Page 136 of 157